Clear-Tite Contact Cement

It takes a special adhesive to hold fast when the temperature goes up.

  • Bonds plastic laminates and wood veneers
  • Repairs seat covers, weather stripping and loose flooring
  • Provides a high-strength bond resistant to liquids and heat
  • Sets on contact to eliminate the need for clamping

It takes a special adhesive to hold fast when the temperature goes up.

And Clear-Tite is a special adhesive. Developed to hold fast at temperatures of up to 250°F, it’s the clear choice for installations where a hot pan, a warm oven or a steamy faucet might cause lesser glues to soften.

Maybe that’s why Clear-Tite has been the clear choice for more than 40 years for everything from tile and linoleum to cabinets, countertops, glass, carpeting and more. It leaves your installation flawless – even when the heat is on.

Used in the manufacture of kitchen cabinets, counter tops, desktops, tabletops, store fixtures, and hard orthotics.

Applications: Wood, Metal, Rubber, Leather, Glass, Carpeting, Cove Base, Plastics

General Instructions

  1. Clean surfaces with alcohol or compatible solvent.
  2. Lightly sand any glossy surfaces.
  3. Apply an even coat to both surfaces to be joined.
  4. Allow cement to set for 10 minutes or until tacky.
  5. Press together and allow to bind before use.

Use our RH Thinner for prep and cleanup.

Technical Data

  • Base: Neoprene Resin
  • Solvent: Heptane, Acetone, Toluene, MEK
  • Colour: Beige
  • Viscosity: Light, 750-900 cps at room temperature
  • Application: Brush, Roller, Notched Trowel, Squeeze Bottle
  • Solids: 21% ± 1% (approx.)
  • Net Weight: 7.2 lbs./gallon (approx.)
  • Temperature Range: -30° to 250° F
  • Flash Point: 17° F
  • Shelf Life: 18 months from date of manufacture
  • Tack Time: 10 minutes (approx.)
  • Coverage: 1 oz./sq. ft. (bonded area)

Featured Applications

Copyright 2024 - RH Adhesives | SimNic Imports Ltd. All Rights Reserved.